SCR-48 BUILD GUIDE
Position Trailer and unhitch.
Disconnect all electric and air lines.
Move vehicle out of the way
Power up the generator by turning the key to on wait for lights to go out and press the hand button followed by green button
make sure all RCB switches are on.
Generator should start after few seconds.
Walk around trailer there are 2 levers near each leg one controls in,out and up,down level trailer appropriately.
Yellow floor pads are located in a box at rear.
When lifting screen make sure the screen is fully down when initial unfold and then lift above the legs then lower while unfolding in unison,
to do the last unfold make sure screen is fully on deck. (checking rear seating pads on rear of screen)
Lifting screen pt1
This is the bracket that needs to line up on the reverse of the screen.
please don't spin the screen 360° in one direction as you'll damage the cat5 cable.
Lifting screen pt2
In the box under trailer there is a big black box open the front to find a scaler (Kramer) DVD, amp, sender box, blackmagic converter.
a loom of cables compromised of HDMI cables, VGA cables, bnc, phono.
depending on what you need.
There is a wind meter fitted to the top of the screen and the readout display is located in the box,
just make the client aware of this, the wind ratings are on the sign off sheets.